Thermostat STC-3028
TI8840348
The humidity and temperature sensor STC-3028 is a solution for use in many projects wherever it is necessary to control the humidity and temperature of the air at the same time, for example in warehouses, production halls, drying rooms, greenhouses or museums.
The controller has two LED displays: 1 red, which shows the temperature and 2 blue, which shows the humidity.
LED diodes are located above the display, the light of which informs that the relay is switched on and thus the activity of the relevant system.
The thermostat has a heating / cooling option depending on the configuration and also a hygrometer with a dehumidification / watering function depending on the configuration.
The temperature and humidity controller in the set with the sensor is powered by 230V. It has 2 readable displays: red responsible for temperature indication and blue showing humidity and rubber buttons to change the configuration. Above each of the displays is an LED that lights up when the temperature/humidity control device is activated. Depending on the settings made, the controller can work simultaneously in the following modes: heating/cooling and humidification/drying. The device is very easy to configure, it can handle connected devices (e.g. fans, heaters, humidifiers, sprinklers, boilers) with a power not exceeding 2500W and a maximum current consumption of 10A per channel. The module has a memory for settings, a power failure does not reset the entered values.
Suitable for temperature and humidity control in:
- terrariums
- cold stores
- industrial halls
- tunnels with plants
- growing mushrooms
- dryers
Technical parameters:
- type: temperature and humidity controller
- supply voltage 230V AC
- number of channels: 2 (1 for temperature control, 2 for humidity control)
- maximum power of controlled devices: 2500W for each channel
- maximum current consumption for each channel: 10A
- temperature measurement range: -20 to 80°C
- humidity measurement range: 0 to 100%RH
- resolution of humidity and temperature measurement: 0.1
- accuracy of temperature measurement +/- 1° C
- humidity measurement accuracy +/- 0.1%
- dimensions: 75mm x 85mm x 29mm
E.A.N
5903933691879
Effettua l'accesso così da poter essere ricontattato
