Satellite relay DiSEqC EMP S2 / 1PCPopt-W1, 2x SAT, 1x Terr, 1 output
TI14530839
Satellite relay (S2/1PCPopt-W1), switch DiseqC 2.0, for 2 LNB Monobl.+terr.TV, warranty 72 month
Satellite relay-switch DiseqC 2.0 with the trade name S2/1PCPopt-W1 allows to extend the existing reception from one parabolic antenna with LNB type Monoblock (eg satellites Astra 1/19.2°E and Astra 3/23.5°E) by reception from another parabolic antenna with another LNB or LNB Monoblock and at the same time for a parabolic antenna combine with DVB-T2 terrestrial broadcasting into one coaxial cable. The Option control command (type S2/1PCPopt-W1, A/C receiver settings) is used to switch between the so-called monoblock and another LNB. One satellite receiver can be connected to the output, which allows switching in the DiseqC 1.0 (2.0) standard "Option" command and a television for terrestrial DVB-T2 broadcasting.
Profi Class product line with a 72-month manufacturer's warranty.
Product parameters :
- satellite switch for signal from up to two LNB Monoblock (4 satellites) to one satellite receiver
- built-in combiner SAT IF + terr. TV
- outdoor design
- control of signal switch DiSEqC 1.0 (2.0) command "Option"
Technical parameters :
- frequency range of each of 2 sat. inputs : 950 - 2300 MHz
- frequency range terr. input : 5 - 862 MHz
- output frequency range : 5 - 2300 MHz
- continuous attenuation sat. IF : 5 dB max
- continuous attenuation of terr. TV : 2 dB avg
- isolation between satellite inputs : 25 dB min
- power consumption from each receiver (tuner) : 30 mA (18V) + LNB consumption
- current permeability : 400 mA max
- switch control commands : DiSEqC 1.0 (2.0) command "Option"
- dimensions (l, w, h) : 8.2 x 7.7 x 2.3 cm
- temperature range : -30 ~ +70 ° C
- outdoor and indoor use
Satellite relay-switch DiseqC 2.0 with the trade name S2/1PCPopt-W1 allows to extend the existing reception from one parabolic antenna with LNB type Monoblock (eg satellites Astra 1/19.2°E and Astra 3/23.5°E) by reception from another parabolic antenna with another LNB or LNB Monoblock and at the same time for a parabolic antenna combine with DVB-T2 terrestrial broadcasting into one coaxial cable. The Option control command (type S2/1PCPopt-W1, A/C receiver settings) is used to switch between the so-called monoblock and another LNB. One satellite receiver can be connected to the output, which allows switching in the DiseqC 1.0 (2.0) standard "Option" command and a television for terrestrial DVB-T2 broadcasting.
Profi Class product line with a 72-month manufacturer's warranty.
Product parameters :
- satellite switch for signal from up to two LNB Monoblock (4 satellites) to one satellite receiver
- built-in combiner SAT IF + terr. TV
- outdoor design
- control of signal switch DiSEqC 1.0 (2.0) command "Option"
Technical parameters :
- frequency range of each of 2 sat. inputs : 950 - 2300 MHz
- frequency range terr. input : 5 - 862 MHz
- output frequency range : 5 - 2300 MHz
- continuous attenuation sat. IF : 5 dB max
- continuous attenuation of terr. TV : 2 dB avg
- isolation between satellite inputs : 25 dB min
- power consumption from each receiver (tuner) : 30 mA (18V) + LNB consumption
- current permeability : 400 mA max
- switch control commands : DiSEqC 1.0 (2.0) command "Option"
- dimensions (l, w, h) : 8.2 x 7.7 x 2.3 cm
- temperature range : -30 ~ +70 ° C
- outdoor and indoor use
Brand
EMP Centauri
Effettua l'accesso così da poter essere ricontattato
