Satellite relay DiSEqC EMP S8 / 1PCP-W2, 8x SAT, 1x Terr, 1 output
TI14530838
Satellite relay (S8/1PCP-W2),DiseqC switch 1.0, 8xSAT IF/1xSAT IF+SAT+TV combiner, warranty 72month
The DiseqC 1.0 -1.2 satellite relay - switch with the trade name S8/1PCP-W2 enables the switching of the SAT IF signal from up to eight satellites and their combination at a parabolic antenna with DVB-T2 terrestrial transmission into one coaxial cable (replaces the hub in eight directions for terrestrial broadcasting). The output allows the connection of one satellite receiver, which allows switching using DiSEqC 1.0, 1.1, 1.2 and television commands for terrestrial DVB-T2 broadcasting. The control mode is selected by the built-in DIP switch, for details see the Operating Instructions.
The switch has a cover suitable for outdoor environments. Profi Class product line with a 72-month manufacturer's warranty.
Product parameters :
- satellite switch for signal from up to 8 satellites to one satellite receiver
- built-in combiner SAT IF + terr. TV
- outdoor design
- switch control signals min. DiSEqC 1.0 - 1.2
Technical parameters :
- frequency range of each sat. input : 950 - 2300 MHz
- frequency range terr. input : 5 - 862 MHz
- output frequency range : 5 - 2300 MHz
- continuous attenuation sat. IF : 5 dB max
- continuous attenuation of terr. TV : 3 dB avg
- isolation between satellite inputs : 25 dB min
- power consumption from each receiver (tuner) : 60 mA (18V) + LNB consumption
- current permeability : 400 mA max
- switch control commands : DiSEqC 1.0, 1.1, 1.2
- dimensions (l, w, h) : 11.26 x 11.2 x 4.9 cm
- temperature range : -30 ~ +70 ° C
- outdoor and indoor use
The DiseqC 1.0 -1.2 satellite relay - switch with the trade name S8/1PCP-W2 enables the switching of the SAT IF signal from up to eight satellites and their combination at a parabolic antenna with DVB-T2 terrestrial transmission into one coaxial cable (replaces the hub in eight directions for terrestrial broadcasting). The output allows the connection of one satellite receiver, which allows switching using DiSEqC 1.0, 1.1, 1.2 and television commands for terrestrial DVB-T2 broadcasting. The control mode is selected by the built-in DIP switch, for details see the Operating Instructions.
The switch has a cover suitable for outdoor environments. Profi Class product line with a 72-month manufacturer's warranty.
Product parameters :
- satellite switch for signal from up to 8 satellites to one satellite receiver
- built-in combiner SAT IF + terr. TV
- outdoor design
- switch control signals min. DiSEqC 1.0 - 1.2
Technical parameters :
- frequency range of each sat. input : 950 - 2300 MHz
- frequency range terr. input : 5 - 862 MHz
- output frequency range : 5 - 2300 MHz
- continuous attenuation sat. IF : 5 dB max
- continuous attenuation of terr. TV : 3 dB avg
- isolation between satellite inputs : 25 dB min
- power consumption from each receiver (tuner) : 60 mA (18V) + LNB consumption
- current permeability : 400 mA max
- switch control commands : DiSEqC 1.0, 1.1, 1.2
- dimensions (l, w, h) : 11.26 x 11.2 x 4.9 cm
- temperature range : -30 ~ +70 ° C
- outdoor and indoor use
Brand
EMP Centauri
Effettua l'accesso così da poter essere ricontattato
