PU foam cleaner PENOSIL Cleaner 929 500ml
TI6560820
Cleaning spray for removing uncured construction foam from tools and surfaces.
Immediate effect, effective cleaning.
Use
Use with spray nozzle or foam gun.
Cleaning the inside and outside of the foam gun after use.
Cleaning clothes and tools from uncured construction foam.
Cleaning window frames, window sills, doors, door frames, etc. from uncured construction foam during work.
Application procedure
Air temperature during use: -10 °C to +30 °C.
Shake the container thoroughly, shake for at least 5-10 seconds. Remove the plastic cap from the container and attach the spray nozzle. Spray the cleaner on the uncured foam, let it work and wipe off if necessary. When cleaning the foam gun, first clean the surface of the gun. Then screw the foam gun tightly onto the container and spray the cleaner to clean the inside of the gun. Wait a few
minutes and spray again to complete the cleaning process. Always keep the container upside down when working with the gun.
Cleaning
Cover with an inert absorbent (eg sand), collect and place in a suitable container or allow to evaporate.
Technical parameters:
Solvent: acetone
Propellant: propane, isobutane
Colorless
Storage
The guaranteed shelf life is 24 months from the date of production if stored in unopened packaging in a cool and dry place at a temperature of +5 °C to +30 °C. Do not expose to temperatures above +50 °C, do not store near heat sources or in direct sunlight. Store and transport in an upright position. Secure the container before transporting it.
Limitations
Not suitable for removing hardened PU foam
Observe the expiration date
Safety notice
Pressure vessel. Use only in well-ventilated areas. Do not smoke during application! Use protective equipment if necessary. Keep out of reach of children.
Brand
PENOSIL
E.A.N
4743307174864
Effettua l'accesso così da poter essere ricontattato
